Shower room trend pace, both stylish and convenient, good people all ages. The shower room exactly how to install it? If you install, you need to pay attention to what issues?
1, be sure to read the installation instructions carefully before installing the shower room, check the originals and must clear the install location has water pipes, electrical wiring, gas pipes and so on, so as not to cause unnecessary trouble and loss.
2, in accordance with the manufacturer's instructions, according to the walls with flexible gain the necessary positions for stroke, note must be marked clearly depicts the best installation location, pay attention to whether stroke vertical, not inclined to help shower room activities reasonable control closed and the overall coordination of beautiful shower room.
3, in the wall screw into corresponding expansion when the rubber and exposed part should be cut to ensure the appearance.
4, according to the situation, put the end of the basin (or Shiji) placed in the shower the best installation location, below the adjusted lower basin "cross" level, Shiji horizontal direct effect or the end of the installation of the shower room.
5, when installing shower sliding doors, should pay attention to adjust top and bottom pulley tightness, not too tight, too tight you cannot push-pull; too loose, glass doors come off easily if double doors you should be aware that elastic matching double door pulley, and the fit of the magnetic strip.
6, shower room after the installation is complete, should pay attention to glass glue to seal the room against shower leaks.
Having read these, it is estimated that many comrades will feel that installing a shower room is not too complex!